Same PET job, different shade every batch? Streaks, yellowing, gels, rejected parts - usually not the mold. It is the coloring system and drying step.
We are a Suzhou plastics coloring specialist with 24 years in compounding. We supply pre-colored PET granules that run clean: stable color, low haze, no plate-out, easy on injection and extrusion lines.
Typical Properties of Our Colored PET Compounds
|
Property |
Typical Value |
Test Method |
|
Melt Flow Rate |
14–60 g/10min (265℃/5kg) |
ASTM D1238 |
|
Density |
1.33–1.40 g/cm³ |
ASTM D792 |
|
Tensile Strength |
55–65 MPa (yield) |
ASTM D638 |
|
Flexural Modulus |
2000–2300 MPa |
ASTM D790 |
|
Impact Strength (Notched Izod) |
40–100 J/m |
ASTM D256 |
|
Color |
Custom: transparent / opaque / metallic / pearlescent |
- |
|
Color Tolerance |
ΔE ≤ 0.8 (batch to batch, D65) |
Spectro |
|
Processing Method |
Injection Molding / Sheet Extrusion |
- |
Glass-fiber reinforced PET grades quoted separately.
Real Problems We Fix on the Production Floor
1. Batch-to-batch color shift
Cause: poor dispersion, wet resin, wrong light source.
Fix: computer match + retained lot sample, moisture <0.005%, ΔE≤0.8 under D65.
2. Yellowing after molding
Cause: PET hydrolysis + heat history + low-grade pigment.
Fix: dehumidify dry 120℃×4h, melt 260–285℃, 300℃-stable pigments + anti-yellow system.
3. Gels, black spots, streaks
Cause: weak shear, dirty rPET.
Fix: twin-screw compounding, online filtration, cleaned recycle stream.
4. Sheet sticking and warp
Cause: wrong carrier, unstable crystallization.
Fix: PET-carrier masterbatch only, tuned roll profile, nucleating agent if needed.
5. EU compliance blocked
We provide TDS, SDS, RoHS, REACH. Food-contact (FDA/EU 10-2011) and GRS/ISCC+ on request.
Color Solutions We Run
Transparent tint (blue/green/amber): virgin PET + 1–2% PET-carrier MB
White appliance shell: pre-colored white PET, TiO₂ in PET carrier, ΔE≤0.8
Outdoor part: PET compound + UV absorber + HALS
rPET sheet: de-odorized base + opaque white + gel control
Metallic / pearl: directional dispersion, oxidation-stable flake
Need other colored plastics instead of colored PET? See below.
https://www.plentyplastic.com/pre-colored-resin/abs-pre-colored-pellets/abs-pre-colored-pellets-injection.html
https://www.plentyplastic.com/pre-colored-resin/custom-color-pp-pellets/pp-pre-colored-pellets.html
Need virgin plastic pellets instead of pre-colored pellets? See our virgin plastics below, See https://www.plentyplastic.com/pellets/plastic-pellets/lg-yongxing-abs-hi121h-balanced-high-gloss.html
https://www.plentyplastic.com/granules/plastic-granules/chimei-pa-757k-virgin-abs-high-gloss-general.html
How Sampling Works
Send Pantone / RAL / molded sample + process type
We ship 200g–1kg trial granules
You mold or extrude, we tune the match
Production: 25kg/bag, 7–10 days lead time, retained sample per lot
FAQ
Q: Must PET be dried before coloring?
Yes. PET hydrolyzes fast. Dry at 120℃ for 4h+ before use.
Q: Pre-colored granules or masterbatch?
Masterbatch for multi-color small runs. Pre-colored PET for large, single-color, appearance-critical parts.
Q: Can rPET be colored light shades?
Yes, but base must be de-odored, clarified, and low-contamination.
Q: What color tolerance do you hold?
ΔE≤1.0 standard, ΔE≤0.8 for premium parts, measured under D65.
Q: Do you issue EU documents?
RoHS, REACH, SDS standard. SGS / food-grade / GRS available.
Talk to our technical team: send your PET base, target color, and process. We return a match plan and sample offer.
Hot Tags: pre-colored pet granules for molding & extrusion, China pre-colored pet granules for molding & extrusion manufacturers, suppliers, factory
