Pre-colored AS Granules (SAN)

Pre-colored AS Granules (SAN)
Details:
Pre-colored AS granules eliminate color streaks, batch shift, and yellowing at the source.​ Unlike dry-blending masterbatch at the press, each pellet carries homogeneous, spectro-controlled color—ready for direct injection or extrusion. Ideal for transparent cosmetic jars, appliance panels, and instrument lenses where ΔE ≤1.0 is non-negotiable. Our AS/SAN compounds support custom color matching (Pantone, RAL, Lab), food-grade compliance (FDA, EU 10/2011), and functional add-ons (UV, FR, impact modifier). Every batch ships with COA, color chip, and 3rd-party test docs (RoHS, REACH, UL). Result: fewer rejects, less purging scrap, zero on-press dosing guesswork. Send your color standard and volume—sample lead time quoted in one working day.
Send Inquiry
Description
Send Inquiry

If your AS parts come out darker on one side, shift shade between shifts, or turn hazy yellow under inspection light-your injection molder isn't the only problem. The coloring method is. This page explains, in plain engineering terms, how pre-colored AS granules (SAN resin)​ eliminate color variation before the pellet even hits your hopper.

Why AS / SAN Coloring Is Harder Than It Looks

AS (SAN - Styrene Acrylonitrile) is prized for clarity, surface gloss, rigidity, and chemical resistance. It's everywhere: cosmetic jars, transparent housings, appliance panels, instrument lenses, tableware.

But three properties make it a coloring headache:

Hygroscopic​ - absorbs moisture fast. Injected wet, you get silver streaks, splay, and mottled color.

Temperature-sensitive​ - process window sits around 200–260°C. Overheat = yellowing/degradation. Underheat = weld lines and poor dispersion.

Transparent parts magnify ΔE​ - even a ΔE under 1.0 shows up visually on clear surfaces.

When you dry-blend masterbatch at the press, you're betting on consistent dosing, stable humidity, and a well-tuned screw. One variable drifts - color drifts.

What Pre-colored AS Granules Actually Are

Pre-colored AS granules​ = pigment or dye is compounded directly into the AS polymer via twin-screw extrusion before it reaches your factory. Every pellet carries the final color, homogeneously distributed at the molecular level.

This is not​ masterbatch. Not​ dry pigment. Not​ surface dyeing.

Factor

Masterbatch + Natural AS

Pre-colored AS Granules

Dispersion uniformity

Depends on dosing & screw shear

Locked in at compounding stage

Batch-to-batch ΔE

Prone to ratio drift

Spectro-controlled, ΔE ≤1.0 typical

Dosing at press

Requires gravimetric feeder

Open bag → direct feed

Clarity on transparent parts

Streaks, haze risk

Cleaner, minimal transmission loss

Purging between colors

20–50 kg scrap common

Only when changing color SKUs

Per-ton cost

Lower upfront

Slightly higher (saves rework)

Injection & Extrusion: Common Pain Points & Field Fixes

Pain Point 1: Same mold, different color on day shift vs. night shift

Root cause:​ Masterbatch dosing drift, humidity swings, regrind ratio chaos.

Fix:

Switch to pre-colored AS compound - remove on-press metering entirely

Cap regrind at ≤15%, same color/batch only

Log physical color chip + spectro ΔE for every incoming lot

Pain Point 2: Transparent AS parts look hazy or yellow

Root cause:​ Pigment thermal stability insufficient; AS thermal residence too long; dye migration.

Fix:

Use heat-stable transparent dye systems (e.g., anthraquinone-based)

Process at moderate shear, short residence: barrel 220–250°C, mold 40–70°C

Never exceed 270°C; purge barrel during extended stops

Pain Point 3: Color changeover wastes half a day and 30+ kg of material

Root cause:​ Masterbatch trapped in screw dead zones.

Fix:

Stock pre-colored AS by SKU; assign light-color runs to light-color tooling

Purge with PP/PE transition resin, don't flush with new colored material

Pain Point 4: Export buyers demand compliance paperwork

Common requests:​ RoHS, REACH, FDA food contact, UL Yellow Card.

Fix:

Pre-colored AS ships with COA + color report + 3rd-party test (SGS/UL)

Food-contact grades use low-migration pigments - no gambling with post-added colorant

When to Choose Pre-colored AS vs. Masterbatch

Choose pre-colored AS granules when:

Transparent / translucent cosmetic or display parts

Appliance fascia, instrument lenses, high-gloss housings

Multi-batch, small-to-medium runs requiring strict color repeatability

Export orders needing traceable color documentation

You'd rather not train a full-time color technician

Choose masterbatch when:

High-volume, single-color, opaque parts

Tight color tolerance not critical (ΔE ≤2.0 acceptable)

Press already equipped with calibrated gravimetric dosing

Field rule:​ If color determines reject rate, go pre-colored. If color just needs to be "roughly right," masterbatch is fine.

Our Pre-colored AS Granules: What You Get

Base resin options:​ General-purpose AS, high-clarity AS, heat-resistant AS, food-grade AS

Color matching:​ Pantone, RAL, physical sample, or Lab value. Computer formulation, ΔE ≤1.0 (tighter on request)

Functional add-ons compounded in:​ UV stabilizer, flame retardant, impact modifier, anti-static

Per-batch documentation:​ Color chip, spectro data sheet, sealed dry-pack

Lead time:​ Custom color formulation in ~2 hours; sample shots shipped fast

Processing Guidelines (Copy These Parameters)

Parameter

Setting

Drying

80–85°C × 2–4 hrs; use within 4 hrs of opening or reseal

Barrel temp

Rear 180–200°C / Middle 210–230°C / Front 220–250°C

Back pressure

Medium–high for homogenization

Screw speed

Moderate; avoid long residence

Color evaluation

D65 standard light booth, evaluate at final wall thickness

FAQ

Q: How much more expensive are pre-colored AS granules vs. natural AS + masterbatch?

Typically 8–20% higher per ton. Factor in saved rework, purging scrap, and rejected shipments - total cost usually comes out lower.

Q: Can you match our existing color standard exactly?

Yes. Provide Pantone number, physical sample, or Lab values. We produce a sample batch for sign-off before full production. Signed chip archived for repeat orders.

Q: Will pre-colored transparent AS affect light transmission?

Transparent dye systems cause minimal transmission loss. Opaque pigments (TiO₂, carbon black) are a different case - discuss application with our tech team.

Q: What's your minimum order quantity for custom colors?

MOQ varies by pigment system. Stock colors available for trial quantities. Contact us with your color reference.

Q: Do you supply compliance documentation for EU and US imports?

Yes - COA, MSDS, RoHS, REACH as standard. FDA or EU 10/2011 migration testing available on request for food-contact grades.

Q: Can you be our backup source alongside our existing AS supplier?

Absolutely. We complement your primary resin supply by specializing in color-stable pre-colored grades - ideal for surge orders and color-critical SKUs.

Bottom Line

Pre-colored AS granules aren't "expensive masterbatch." They move color risk upstream - to the compounding line where dispersion is controlled, documented, and repeatable. Your injection floor shouldn't be where color gets decided.

Send us your color number, application, and volume. We'll reply with base-resin grade, color-match pathway, and sample lead time - in one working day.

Related: https://www.plentyplastic.com/granules/plastic-granules/premium-as-plastic-pellets.html

Hot Tags: pre-colored as granules (san), China pre-colored as granules (san) manufacturers, suppliers, factory

Send Inquiry